HM8143: Turning off the button beep (beep off) The HM8143 offers the possibility to turn ON/OFF the button beep. While turning on the instrument keep the CURRENT button of the right channel depressed to turn off ...
HM8143: Current source / current sink The HM8143 operates in the 130W class. With its two 0...30V / 2A two-quadrant outputs, serving as current source as well as current sink, it is unique in its ...
HM8143: Constant current operation (CC) As soon as the output current reaches the programmed current limit value, the power supply automatically switches into its current source mode, if the electronic ...
HM8143: Saving of PC Arbitrary data The memory for the arbitrary waveform got power from an internal capacitor. This allow, that the data are kept some day's in the memory, even the Instrument was ...
HM8143: Points of Arbitrary mode The power supply HM8143 provides on the part of software or hardware a different number of points in the Arbitrary mode.
On the part of hardware the HM8143 ...
HM8143: Time interval between 2 commands We recommend a time intervall of 100ms between commands. We have tested an interval up to 50ms and the test results were positive.
Embedded World: HAMEG introduces new HMO3000 series of oscilloscopes with up to 500MHz bandwidth. +++ Spectrum Analyzers HMS1000, HMS1010 and HMS1000E now with extended frequency range of 1.6GHz… [more…] +++ HAMEG summer promotion: Great offers until October 2013 +++