HAMEG: Interfaces


Warranty & Repair

HAMEG Calibration

Downloads

Knowledge Base
	General
	Oscilloscopes
	Spectrum Analyzer
	Power Supplies
	Programmable Measuring Instruments Series 8100
	Modular System Series HM8000
	Accessories

Blog

Dealer's Area

Knowledge Base

General

Interfaces

Go to category:

Go to article ID:

Full-text search:


Categories Interfaces:

	RS-232 Allocation

	HO720: Generate a LabView USB driver

	HO720 / HO730: Virtual COM Port

	HO720: Loading VCP (table "Advanced")

	HO720 / HO730: NI Measurement & Automation Explorer

	HO720 / HO820 / HO870: Linux assistance

	HO730: TCP/IP connection example for NI LabView

	HO820: Interface for Series 8100

	HO820: Driver installation

	RS-232 Allocation The HAMEG RS-232 interface is arranged as a 9-pole D-SUB jack. This bidirectional interface is intended to send and receive setup parameters, data and remote ...

	HO720: Generate a LabView USB driver PCI, USB and several other bus systems have addresses to identify a Vendor ID (VID) and Product ID (PID). Based on the VID you can find out the manufacturer of the ...

	HO720 / HO730: Virtual COM Port To control a device with a HO730 or HO720 dual interface via USB without a provided HAMEG software, we recommend to use a virtual COM port (VCP). This VCP ...

	HO720: Loading VCP (table "Advanced") If a program or other software access on the virtual COM port , which was assigned to the HO720 interface, the tab "Advanced" will disappear from the properties of ...

	HO720 / HO730: NI Measurement & Automation Explorer If you want to work with the NI Measurement & Automation Explorer, you have to activate the virtual COM port option in the device manager (device manager --> HAMEG ...

	HO720 / HO820 / HO870: Linux assistance Basically, HAMEG don't offer Linux support. All data without guarantee (hints of HAMEG customers)! The actual Linux kernel (from version ...

	HO730: TCP/IP connection example for NI LabView

	HO820: Interface for Series 8100 The USB interface of the HO820 will be identified automatically, if you plug in the USB connector. For the connection between PC and instrument you ...

	HO820: Driver installation Please note that a double (manual) driver installation is required. In the ZIP file of the HO820 driver you can find two different driver files: FTDIBus.inf for the ...


	back to General

Spectrum Analyzers HMS1000, HMS1010 and HMS1000E now with extended frequency range of 1.6GHz… [more…] +++ HAMEG summer promotion: Great offers until October 2013 +++ Embedded World: HAMEG introduces new HMO3000 series of oscilloscopes with up to 500MHz bandwidth. +++