HAMEG Instruments GmbH
Home | Products | Blog | Dealer | Service & Support | Company | Contact    
Warranty & Repair
HAMEG Calibration
Downloads
Knowledge Base
General
Oscilloscopes
Spectrum Analyzer
Power Supplies
Programmable Measuring Instruments Series 8100
Modular System Series HM8000
Accessories
Blog
Dealer's Area

Knowledge Base

KB > Accessories 
Go to category:
Go to article ID:
Full-text search:
Categories Accessories:
folderHZ355: 10:1 Slimline Probe 500MHz
folderHZ530 / HZ540 / HZ550: Electromagnetic fields
folderHZ530 / HZ540 / HZ550: Correction values for EMC test
folderHZ540 / HZ550: Probe Power
folderHZ547: OUT terminal
articleHZ355: 10:1 Slimline Probe 500MHz
The HZ355 passive probe family sets new standards in high performance probing.   The compact design with only 2.5mm housing diameter at the probe tip is ...
articleHZ530 / HZ540 / HZ550: Electromagnetic fields
The H-field probe sends a voltage that is proportional to the magnetic field strength to the spectrum analyzer. This makes it possible to localize sources of ...
articleHZ530 / HZ540 / HZ550: Correction values for EMC test
The HAMEG probe sets includes probes which are used for so-called relative measurements.   This means that one performs a measurement, afterwards changes ...
articleHZ540 / HZ550: Probe Power
The probe power connector of HAMEG spectrum analyzers (2,5 mm jack) can be used as a supply (6 VDC) e.g. for HAMEG probes. The inner contact is +6V, the outer ...
articleHZ547: OUT terminal
The OUT terminal of the HZ547 is slightly loose. Due to the tolerances of the spectrum analyzer connectors as well as the terminals of the HZ547, the OUT terminal ...
articleback to  Knowledge Base
 
 

© 2013 HAMEG Instruments GmbH | Edita | Condiciones generales